Product Reviews

SMALLRIG 4382 Universal Phone Holder Mount Review

A flexible choice for creators who want to mount a range of smartphones on a camera or tripod and add a small light or microphone.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review is for creators who want a phone clamp that can switch between portrait and landscape while connecting to a camera or tripod.

Its adjustable joints and top cold shoe make it a practical option for mobile filming, livestreams, interviews, and photography.

SMALLRIG 4382 Mount Review Summary

The quick verdict

SMALLRIG 4382 Universal Phone Holder Mount
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 4382 Universal Phone Holder Mount

A flexible choice for creators who want to mount a range of smartphones on a camera or tripod and add a small light or microphone.

  • Fits smartphones with a width of 57–88 mm.
  • Switches between landscape and portrait orientation, with a lock after a 90-degree rotation.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • Connects through a 1/4-inch-20 threaded hole or a cold shoe at the base.

Pros

  • Supports a useful range of phone widths.
  • Makes orientation changes and angle adjustments part of the mount itself.

Consider before buying

  • The 500 g maximum load calls for care when combining a phone with accessories.
  • A phone outside the 57–88 mm width range will not be a fit.
Read the full review summary

The 4382 combines a spring-style phone holding design with two 180-degree rotary joints, giving users several ways to adjust framing without removing the phone from the mount.

It supports phones 57–88 mm wide, and its base offers both a 1/4-inch-20 threaded hole and a cold shoe connection for mounting on compatible camera or tripod setups.

A cold shoe on top provides a place for a microphone or light, while threaded holes allow compatible power bank holders to be attached.

The 73 g holder is best suited to compact phone rigs where adjustable orientation and accessory mounting matter. Check the phone’s width, the mounting hardware on your rig, and the total load before buying.

The buying factors

SMALLRIG 4382 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Phone width compatibility

The stated 57–88 mm range covers a broad selection of smartphones, though fit depends on the phone’s width.

9/10

Orientation flexibility

Two rotary joints support adjustment, and the holder can lock after a 90-degree rotation for switching between landscape and portrait.

8/10

Mounting options

A bottom 1/4-inch-20 threaded hole and cold shoe offer two ways to connect the holder to compatible gear.

7/10

Accessory expansion

The top cold shoe accepts a compatible microphone or light, and spaced threaded holes support compatible power bank holders.

6/10

Load headroom

The stated maximum load is 500 g, so buyers should account for the phone and any attached accessories together.

8/10

Portability

At 73 g, the holder adds little weight to a compact filming kit.

Key Features and Specifications of SMALLRIG 4382 Mount

  • Fits smartphones with a width of 57–88 mm.
  • Switches between landscape and portrait orientation, with a lock after a 90-degree rotation.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • Connects through a 1/4-inch-20 threaded hole or a cold shoe at the base.
  • Top cold shoe accommodates a compatible microphone or light.
  • Multiple threaded holes are designed for compatible power bank holders.
  • Weighs 73 g and has a stated maximum load capacity of 500 g.

Pros and Cons of SMALLRIG 4382 Mount

Pros

  • Supports a useful range of phone widths.
  • Makes orientation changes and angle adjustments part of the mount itself.
  • Offers both threaded and cold shoe mounting at the base.
  • Includes a top cold shoe and threaded holes for expanding a compact rig.

Consider before buying

  • The 500 g maximum load calls for care when combining a phone with accessories.
  • A phone outside the 57–88 mm width range will not be a fit.
  • The mount is not water resistant, so it is not designed for wet conditions.

Who Should Buy SMALLRIG 4382 Mount?

Good fit

Consider the SMALLRIG 4382 if you record with a smartphone and want one holder to serve landscape and portrait setups.

The two rotary joints let you make framing adjustments at the mount, which can be useful when shifting between a fixed tripod shot, a livestream, or an interview angle.

Its connection choices suit creators who already work with camera or tripod hardware that accepts a 1/4-inch-20 thread or cold shoe.

The additional cold shoe on top gives you a mounting point for a compatible microphone or light, while the threaded holes can accommodate compatible power bank holders.

Before committing to a rig layout, confirm that your accessories use the matching interfaces.

Check your phone’s width against the 57–88 mm range, then total the phone and attached gear to stay within the 500 g maximum.

If both checks work for your setup, the holder offers a compact way to build a more adjustable phone rig.

Who should skip it

Skip this holder if your phone is narrower than 57 mm or wider than 88 mm, or if your planned phone-and-accessory load exceeds 500 g.

Look elsewhere if you need a water-resistant phone mount or your camera or tripod setup cannot accept either of the holder’s base connections.

How the SMALLRIG 4382 Mount Fits a Phone-Camera Setup

Framing across orientations

The ability to switch between portrait and landscape gives the holder flexibility for different recording formats.

Its two rotary joints add angle adjustment, which can help position a phone for a tabletop shot, a face-to-camera clip, or an interview.

The product details do not specify a particular range of motion for each joint beyond up to 180 degrees, so check whether the geometry suits your intended rig position.

Checking fit and total load

Phone width is the key compatibility check: the supported range is 57–88 mm.

The stated 500 g capacity applies to the combined mounted load, so include the phone and any gear attached to the holder when planning a setup.

This is especially relevant when using the top cold shoe and power bank holder attachment points together.

Making use of the mounting interfaces

The bottom thread and cold shoe make the holder adaptable to rigs that provide either connection.

The top cold shoe is intended for a microphone or light, while the spaced threaded holes are designed for compatible power bank holders. Confirm the connector type and clearances of each accessory before building around the mount.

Portability and conditions

At 73 g, the holder is a modest addition to a mobile camera kit.

It is listed as not water resistant, which makes it a more natural fit for controlled indoor use or dry outdoor shoots than for situations where exposure to water is expected.

Alternatives to SMALLRIG 4382 Mount

One useful alternative is included because the supplied options offer only one distinct competing design.

Cell Phone Camera Mounts alternative

SMALLRIG 5156 Magnetic Metal Phone Mount
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG 5156 Magnetic Metal Phone Mount

Choose the 4382 if you want a width-based clamp fit and a top cold shoe for a microphone or light.

Consider the 5156 if your iPhone has MagSafe and you prefer a magnetic mounting approach with a detachable top plate; account for its stated warning that external impacts may cause the device to detach.

  • The 5156 is designed for iPhone models with MagSafe functionality and provides portrait or landscape switching, dual rotating shafts, a 1/4-inch-20 threaded hole, a base cold shoe, and multiple threaded holes.
  • Its top round plate detaches for use as a mounting plate, and its stated maximum load is 500 g.
  • The 4382 uses a clamp specified for phones 57–88 mm wide and provides two rotary joints, a base thread and cold shoe, plus a top cold shoe.

Is SMALLRIG 4382 Mount Worth It?

The SMALLRIG 4382 Universal Phone Holder Mount is worth considering for phone-based creators who want adjustable framing, broad stated phone-width compatibility, and accessory mounting in a compact holder.

Its combination of a base thread and cold shoe can fit into varied camera and tripod rigs.

Measure your phone’s width and check the combined weight of your planned setup against the 500 g limit.

If those constraints fit and you do not need water resistance, the 4382 is a practical mount to shortlist for a flexible mobile filming kit.

Your review at a glance

SMALLRIG 4382 Universal Phone Holder Mount
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 4382 Universal Phone Holder Mount

A flexible choice for creators who want to mount a range of smartphones on a camera or tripod and add a small light or microphone.

  • Fits smartphones with a width of 57–88 mm.
  • Switches between landscape and portrait orientation, with a lock after a 90-degree rotation.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • Connects through a 1/4-inch-20 threaded hole or a cold shoe at the base.

Written by

leciawphinney.com Editorial Team

Editorial team

Independent editorial coverage of creative everyday living.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG 4382 Universal Phone Holder Mount

SMALLRIG 4382 Universal Phone Holder Mount

A flexible choice for creators who want to mount a range of smartphones on a camera or tripod and add a small light or microphone.

  • Fits smartphones with a width of 57–88 mm.
  • Switches between landscape and portrait orientation, with a lock after a 90-degree rotation.
Check Video Reviews on Amazon